PET Monofilament Extruder Machine

PET Monofilament Extruder Machine for Bristles High Bend Recovery yarn 100kg/h​

Product Description:

1. Dryer system

2. Extruder

(1) Screw diameter: 90mm; Rotation speed: 0～72rpm.

(2) L:D: 33:1; material of screw: 38CrMoALA ；

The screw structure is special designed for PET chips.

(3) Pressure feedback system can adjust the screw speed automatically to make sure the uniform of yarn.

(4) Manual filter changer

(5) Screw heater: Far infarad

(6) Spinneret device: 1 set

(7) Heater: Electric heating ring to ensure the temperature stabilization.

(8) Two hopper doser: 1 set

3. Queching tank: 1 set

(1) The tank is made by stainless steel 304.

(2) The height of tank is horizontal pushing structure is conveniently to disassembly the spinneret.

4. First seven roller stretching unit

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Steel cabinet with accurately grind gear makes the roller run smoothly.

(3) Reducer is from Zhejiang Tongli Reducer Co., Ltd.

(4) Built-out oil lubrication system which makes the gears run steady.

5. Hot water tank: 1 set

(1) Tank length: 4000mm

(2) Heating power: 50kw, electric heating.

The temperature controlled by solid relay.

(3) The tank is made by SS 304 with the insulating layer

(4) Equip water suction unit.

6. The second seven roller stretching unit

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Steel cabinet with accurately grind gear makes the roller run smoothly.

No rubber roller.

(3) Reducer is from Zhejiang Tongli Reducer Co., Ltd.

7. Single layers hot blast oven: 1 set

(1) Fan power: 2.2KW×2 sets.

(2) Heating power: 22.5KW

(3) Special design of hot air channel which make the temperature evenly.

8. The third seven roller stretching unit

(1) Seven variable diameter rollers, material: steel pipe with hard chrome plating.

(2) Steel cabinet with accurately grind gear makes the roller run smoothly. No rubber

Parameter:

Screw diameter	Φ90mm
Raw material	PET chips	Filament size	0.15-0.3mm
Capacity	100Kg/H	Filament shape	round/profile
Screw L:D	30:1	Stretching unit	3 sets
Screw material	38CrMoALA	Winder	2 spindles
Max linear speed	200m/min	Instillation power	260Kw
Nozzle holes	400 holes	Overall size	39×2.9×2.9m

Pictures: